HOMEABOUT USPRODUCTSSERVICESOnline SalesCONTACT US  
Enigin
PCB Repair
PCBs
Contact Fingers
Socket Adaptors
Manual Test Jigs
Others
Energy Saving Products

    Eniscope

    Lighting

    Air Conditioning

    Refrigeration

    Motors

    LED Lighting

    LESS - Light Energy Saving System

    If you have a conventional lighting set-up you could be wasting over 50% of all the energy it consumes!

    Conventional lighting offers limited control of the energy it uses - in addition to excess cost this produces excess heat which damages your equipment. It is also unable to respond to occupancy changes meaning lights are left on unnecessarily. In addition, conventional lighting cannot intelligently compensate for the presence of natural daylight resulting in over-illumination - this means light is produced whether you need it or not.

    The solution is LESS - An intelligent Light Energy Saving System which uses a combination of cutting-edge control technology and state-of-the-art sensors. A typical LESS installation would look like this:

    Occupancy Sensors

    One of the biggest energy wasters is lights being left on when a room is not in use. Major Improvements in sensitivity and reliability have transformed the primitive 'Motion Sensing' approach into high comfort Occupancy Sensing. This means your lights automatically turn on when a room is occupied and off when its vacant - so you only have light when you actually need it.

    Daylight Dimming Sensors & Ballasts

    In most buildings the lights are on at full intensity all day even when there is plenty of daylight available. This not only wastes energy but causes unpleasant over-lighting. LESS employs 'Daytronic' ballasts and sensors which dynamically adjust your lighting to deliver a guaranteed illumination level at all times. The control is graduated so all you notice is an improved lighting environment and lower bills.

    High-Efficiency Lamps

    As part of a LESS installation we aim to replace any inefficient lamps. For example, conventional Emergency Exit Signs must be permanently lit resulting in high energy and maintenance costs (the lamps, ballasts and batteries require regular maintenance and replacement). Our LED Exit Signs eliminate 100% of the maintenance costs and reduce electricity costs by over 80%.

    Benefits you could experience with LESS include:

    • Total Energy Savings of Over 50% Possible
    • Short Payback Times
    • Suitable For Retrofits or New Buildings
    • Quick & Simple Installation
    • Combine Savings & Comfort
    • Proven in Thousands of Installations
    • Stylish Design, Very Small, Elegant Integration
    • Developed and Manufactured to Highest Quality Standards
     LESS.pdf



     

     

    BACK

    TOP

    INOVUS TECHNOLOGY SDN. BHD.
    (327734-U)
    65, Jalan Bukit Senjuang
    75050 Melaka, Malaysia
    Tel : +606 282 6126
    Fax : +606 282 7408



    l    HOME    l    ABOUT US    l    PRODUCTS    l    SERVICES    l    CONTACT US    l

    All Rights Reserved 2007 Inovus Technology